When it comes to protecting your home from flooding, a reliable backup power system for your sump pump is essential. PumpSpy’s Primary Backup Power System ensures that your sump pump continues to function even during power outages. In this blog, we’ll walk you through the simple installation process of PumpSpy’s system, ensuring that your sump pump is ready to operate when it’s needed the most.
Step 1: Check the Power and Charger Switches
Before starting the installation, ensure that the power switch on the backup power system isin the “off” position. This will prevent any accidental power surges while connecting the system.
Step 4: Connect the Backup Power System to AC Power
Once you’ve confirmed the switches are off, plug the backup power system into an AC power outlet. This will be its main power source when not operating in a backup capacity.
Step 2: Attach the Battery Leads to the Backup Power System
Locate the terminal retention knobs on the backup power system and unscrew them by hand. Next, connect the provided battery leads to the system, ensuring they are securely attached. Once the leads are connected, hand-tighten the terminal retention knobs to secure the connections.
Step 3: Connect the Battery Leads to the Battery
Now, take the other ends of the battery leads and connect them to the battery itself. PumpSpy recommends using a 12-volt deep cycle battery for optimal performance. You may need to use a tool to achieve a snug fit, but be careful not to overtighten the connections. A secure, tight connection will ensure efficient power transfer when the backup system is activated.
Step 5: Turn On the Power and Charger Switches
With everything securely connected, flip the power switch to the “on” position. This will activate the backup system and keep the battery charged while AC power is available.
Step 6: Plug in the Sump Pump and Float Switch
Finally, plug your sump pump and any float switch into one of the outlets on the backup power system. This ensures that your sump pump will continue to operate seamlessly during a power outage, giving you peace of mind knowing your home is protected from potential flooding.
Final Thoughts
PumpSpy’s Primary Backup Power System is designed to keep your sump pump functioning during emergencies, and its installation is straightforward. By following these steps, you can ensure your home remains safe from water damage even when the power goes out.
For the best results, pair your PumpSpy system with a Maintenance Free AGM Battery, available here. Stay protected and prepared with PumpSpy!
