Installing the PumpSpy WiFi Battery Backup System is a straightforward process that ensures your home is protected during power outages. This guide will walk you through each step, from setting up the battery to configuring the system for WiFi monitoring and alerts.
Step 1: Preparing the Battery Case
Start by removing the top of the battery case. This will allow you to place the battery inside securely. For optimal performance, we recommend using PumpSpy’s 12-Volt Deep Cycle Battery, which is specifically designed for this system.
Step 2: Connecting the Battery Leads
Once the battery is in place, connect the battery leads from the WiFi controller to the battery. It’s essential to ensure each connection is secure, but be careful not to over-tighten the leads as this could damage the connections.
Step 3: Securing the Battery Case
After connecting the leads, secure the top of the battery case back onto the bottom. This helps protect the battery and connections while keeping everything organized.
Step 4: Connecting the Pump and Power Cables
Next, you’ll need to connect the following cables to the back of the WiFi controller:
- White Backup Pump Power Cable Connector
- Red and Green Switch Connectors
- Primary Pump Connections
These connections ensure that both the primary and backup pumps are linked to the WiFi controller, allowing for seamless operation and monitoring.
Step 5: Powering the System
Plug the AC power cable into an electrical outlet to power the battery backup pump. Once powered, your PumpSpy WiFi Battery Backup System is ready to be set up for monitoring and alerts.
Step 6: Setting Up the PumpSpy App
To take full advantage of the PumpSpy system’s features, download the PumpSpy app from the App Store or Google Play. Follow these steps to set up your account and connect the system:
- Create an Account: Enter your email address, choose a password, and provide your first and last name to create your PumpSpy account.
- Enter Location Information: Once your account is set up, input the required location details as prompted by the app.
- Connect to WiFi: Follow the on-screen instructions to connect the WiFi controller to your home’s WiFi network.
When the WiFi controller is successfully connected, the WiFi status indicator LED on the controller will turn green.
Step 7: Ready for Action
With the PumpSpy WiFi Battery Backup System installed and connected, your home is now equipped to handle power outages. The system will automatically monitor the pump’s status and provide real-time alerts via the PumpSpy app, ensuring you’re always informed and your basement stays dry.
